Product Description

 

Detailed Photos

 

 

Product Description

An overhead conveyor is a type of conveyor system that is installed above the working area, typically in a manufacturing or industrial setting. It is used to move products, materials, or components from 1 point to another in a factory or warehouse, and is particularly useful for transporting heavy or bulky items that are difficult to move manually.

Overhead conveyors are commonly used in a variety of applications, such as automotive assembly lines, food and beverage processing, material handling and distribution, and storage and retrieval systems. They can be used for both horizontal and vertical transportation and can move products along a fixed path or in a continuous loop.

Some specific uses of overhead conveyors include:

  1. Assembly line transportation: Overhead conveyors are commonly used in manufacturing assembly lines to transport parts and components to different workstations along the line.

  2. Powder coating: Overhead conveyors are used in powder coating operations to move products through a paint booth, where they are coated with a dry powder before being cured in an oven.

 

Spare parts item Features Photo
Up-Down track for rising or falling areas. standard diameter is 1.2 meters,180º angle. it can be cut based on any necessary angles of any install conditions.the angle should not be more than 45º angle. the distance between 2 adjiacent hangers should be considered.
Check track There is a hatch which can open the track, through the hatch, worker can dismantle or install, check or maintain the conveying chains. Driving device for each conveying route is usually located between driver and take-up device for easy checking and maintenace.
Take-up device

(Tensioner)

Keep the chains in the state of original tension and compensate for the tensile deformation caused by tensile force or telescopic deformaton caused by varied temperature while working.
Make sure certain tensile force between driver and take-up device.   Install it behind driver about distance 3~6 meters. Better have no up-down track behind take-up device. 
Straight track for where conveyor chain go straight. it can be cut according to the specific install condition. standard length is 3 meters.
Caterpiller driver device Two types-Standard type and heavy duty type.
The driving device adjust the momentum that the motor ouput, after speed reduction unit increase its power which is to be passed to the driver caterpiller, the pusher dogs on which transport the chain so that chain can move forward.
Hanger  
Several types hangers:

Cross type hanger;

Y type hanger;

I type hanger;

Sprocket wheel hanger;

U-type hanger;

Bearing hanger;

Customized.

Automatic oil sprayer Specially designed for various automatic conveying chain;

More convenient to check oil-feeding diyusyion nsdrf CHINAMFG oil volume in the transparent oil pipes.

 

 
 

 

FAQ

Q1: Are you trading company or manufacturer ?
A: We are factory.

Q2: How long is your delivery time and shipment?
1.Sample Lead-times: generally 30 workdays.
2.Production Lead-times: 60 workdays after getting your deposit.

Q3. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery.
We’ll show you the photos of the products and packages before you pay the balance.

Q4: What is your advantages?
1. Manufacturer,the most competitive price and good quality.
2. Perfect technical engineers give you the best support.
3. OEM is available.
4. Rich stock and quick delivery.

Q5. If you can’t find the product on our website,what do you next?
Please send us inquiry with product pictures and drawings by email or other ways and we’ll check.

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Material: Alloy
Structure: Roller Chain
Surface Treatment: Polishing
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

transmission chain

How does the choice of chain lubricant affect the maintenance requirements?

The choice of chain lubricant has a significant impact on the maintenance requirements of a transmission chain. Here’s a detailed answer to the question:

1. Lubrication Interval: Different chain lubricants have varying properties, including their ability to withstand high temperatures, resist contamination, and provide long-lasting lubrication. The right choice of lubricant can extend the lubrication interval, reducing the frequency of lubrication and, consequently, the maintenance requirements.

2. Wear Protection: The primary function of chain lubrication is to reduce friction and wear between the chain components. The selection of a high-quality lubricant with excellent wear protection properties can significantly extend the chain’s lifespan and reduce the need for frequent replacements or repairs.

3. Contamination Resistance: Some chain lubricants are specifically formulated to resist contaminants such as dust, dirt, or water. Using a lubricant with superior contamination resistance can help maintain optimal chain performance and reduce the risk of premature wear or failure due to the presence of contaminants. This, in turn, reduces the maintenance requirements associated with cleaning and removing contaminants from the chain.

4. Corrosion Prevention: In applications where the chain is exposed to corrosive environments, selecting a chain lubricant with corrosion prevention properties is crucial. Such lubricants form a protective film that helps shield the chain from moisture, chemicals, and other corrosive agents. By using a corrosion-resistant lubricant, the maintenance requirements related to combating corrosion are minimized.

5. Temperature Stability: The operating temperature of a transmission chain can significantly impact its performance and maintenance requirements. Choosing a chain lubricant with excellent temperature stability ensures that the lubricant maintains its viscosity and protective properties even under high temperatures. This reduces the need for frequent lubricant replacements due to thermal degradation.

6. Environmental Considerations: Some applications may have specific environmental regulations or requirements. Choosing a chain lubricant that is environmentally friendly, biodegradable, or compliant with certain standards can simplify maintenance procedures and ensure compliance with regulations.

It’s essential to consult the manufacturer’s recommendations and guidelines when selecting the appropriate chain lubricant for a specific application. Consideration should be given to factors such as operating conditions, load, speed, temperature range, and environmental factors to ensure optimal lubrication and minimize maintenance requirements.

transmission chain

What are the advantages of using a double-pitch transmission chain?

A double-pitch transmission chain offers several advantages in certain applications. Here’s a detailed answer to the question:

1. Cost-Effective: Double-pitch transmission chains are typically less expensive compared to standard pitch chains. This makes them a cost-effective choice for applications where high precision and high load capacity are not essential.

2. Lighter Weight: Double-pitch chains are lighter in weight compared to standard pitch chains of the same length. This can be advantageous in applications where weight reduction is desired, such as in portable equipment or conveyor systems.

3. Reduced Noise and Vibration: The longer pitch of double-pitch chains helps to reduce noise and vibration levels during operation. This can be beneficial in applications where noise reduction is important, such as in automotive or industrial machinery.

4. Higher Speed Capability: Double-pitch chains can operate at higher speeds compared to standard pitch chains. The longer pitch allows for smoother and more efficient motion, making them suitable for applications that require high-speed operation.

5. Extended Life: Due to their longer pitch, double-pitch chains distribute the load over a larger surface area, reducing stress and wear on individual chain components. This can result in an extended service life compared to standard pitch chains.

6. Customization Options: Double-pitch chains can be customized to meet specific application requirements. They can be made with different materials, coatings, and attachments to enhance their performance in specific environments or applications.

7. Wide Availability: Double-pitch transmission chains are widely available in the market, making them easily accessible for various industries and applications. They come in different sizes and configurations to accommodate different load capacities and system designs.

It’s important to note that while double-pitch transmission chains offer advantages in certain applications, they may not be suitable for all applications. Factors such as load capacity, speed, precision, and environmental conditions should be considered when selecting the appropriate chain for a specific application.

transmission chain

What are the main differences between standard and heavy-duty transmission chains?

Standard and heavy-duty transmission chains are designed to meet different load and performance requirements. Here are the main differences between these two types:

  • Load Capacity: Heavy-duty transmission chains are built to handle higher loads and provide greater strength compared to standard chains. They are designed to withstand heavier and more demanding applications.
  • Construction: Heavy-duty transmission chains are typically constructed with thicker plates, larger pins, and stronger components to enhance their durability and load-carrying capacity.
  • Size: Heavy-duty transmission chains are often larger in size compared to standard chains to accommodate the increased load requirements.
  • Weight: Due to their robust construction, heavy-duty transmission chains tend to be heavier than standard chains.
  • Durability: Heavy-duty chains are engineered to have greater wear resistance, fatigue resistance, and overall durability to withstand harsh operating conditions and prolonged usage.
  • Applications: Standard transmission chains are suitable for lighter-duty applications where moderate loads are involved, such as light machinery, conveyors, and small equipment. Heavy-duty transmission chains, on the other hand, are designed for heavy machinery, industrial equipment, mining applications, and other demanding environments.

It’s important to consider the specific requirements of your application, including load capacity, operating conditions, and expected lifespan, to determine whether a standard or heavy-duty transmission chain is the right choice.

China Custom OEM Factory Price Overhead Trolley Transmission Chain for Powder Coating  China Custom OEM Factory Price Overhead Trolley Transmission Chain for Powder Coating
editor by CX 2024-04-19